[ REQ 5117]: install help

[mrm at cam.cornell.edu]

Thanks for your last response. 
[5114     closed   slevy at geom.umn.edu 10/27/94 Mark Myers <mrm at cam.cornell.edu>]

As per instructions, I fetched, compiled and installed FORMS library in the
proper places.  When I proceed with >> make install << I get the following
compilation error:




rm -f gvmain.o gvmain.c
ln ../gvmain.c .
cc -I.. -O -float -prototypes -Wf,-XNl4096 -Dlight_ui -DMGGL -DMACHTYPE='"sgi"' -I../../../../../include  -c gvmain.c
cfe: Error: ../gvui.h, line 14: Syntax Error
   void cam_exposegl(Widget, XtPointer, GlxDrawCallbackStruct *);
 ---------------------------------------^
cfe: Error: ../gvui.h, line 15: Syntax Error
   void cam_initgl(Widget, XtPointer, GlxDrawCallbackStruct *);
 -------------------------------------^
*** Error code 1 (bu21)


Recall from before the I am building on a Indigo2 system:

1 150 MHZ IP22 Processor
FPU: MIPS R4010 Floating Point Chip Revision: 0.0
CPU: MIPS R4400 Processor Chip Revision: 5.0
On-board serial ports: 2
On-board bi-directional parallel port
Data cache size: 16 Kbytes
Instruction cache size: 16 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Main memory size: 128 Mbytes
EISA bus: adapter 0
Iris Audio Processor: version A2 revision 0.1.0
Integral Ethernet: ec0, version 1
Disk drive: unit 2 on SCSI controller 1
Integral SCSI controller 1: Version WD33C93B, revision D
CDROM: unit 3 on SCSI controller 0
Disk drive / removable media: unit 2 on SCSI controller 0: 720K/1.44M floppy
Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 0: Version WD33C93B, revision D
Graphics board: GU1-Extreme

with

IRIX calisto 5.2 02282016 IP22 mips

Also, I have begun to compile a list of compiler warnings that occur
under the native compiler delivered with IRIX 5.2.   Are you interested
in this list?


Can you suggest the proper fix for the above compiler error in 
gvmain()?

Any help you might provide would be greatly appreciated.

Thanks!

mark myers
mrm at cam.cornell.edu