go to www.geomview.org home page
 
Home

Overview
FAQ
Documentation

Download

Mailing List

Geomview For Windows?

Support
Users
Development

Bug Reporting
Contributing
Contact Us

Sponsors

 

Site Search

 

Advanced
Search

 
About the software@geom archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[ REQ 6047]: Bug in geomview-1.6b





Hi,

We have a beta copy of Geomview 1.6b (via request 5906) and I've found
a bug that occurs when running Geomview on a Irix 6.2 machine but
using a Irix 5.3 machine for display purposes:
    Polygon faces of an OFF file don't display on the Irix 5.3
    display when Geomview runs on an Irix 6.2 machine.

If I run Geomview 1.5 on the 5.3 machine everything is fine.  If I run
Geomview 1.6b on the 6.2 machine and use either it's console display
or another 6.3 machine's display everything is fine.  Vectors, menus,
etc. all work fine, it is only the polygons that aren't displayed on
the 5.3 console when Geomview 1.6b runs on an Irix 6.2 machine.




The OFF file is:

OFF
9 8 0 # number of vertices, faces, and edges
# the vertices and normals
1.00  1.00  1.00  
1.00  1.50  1.00  
1.00  2.00  1.00  
1.50  1.00  1.00  
1.50  1.50  1.00  
1.50  2.00  1.00  
2.00  1.00  1.00  
2.00  1.50  1.00  
2.00  2.00  1.00  
# the faces
3 0 3 4 1.0 1.0 1.0
3 0 4 1 1.0 1.0 1.0
3 1 4 5 1.0 1.0 1.0
3 1 5 2 1.0 1.0 1.0
3 3 6 7 1.0 1.0 1.0
3 3 7 4 1.0 1.0 1.0
3 4 7 8 1.0 1.0 1.0
3 4 8 5 1.0 1.0 1.0


The 6.2 machine running Geomview is:

[zeppo Radical/radical].16 > uname -a
IRIX zeppo 6.2 03131015 IP22

[zeppo Radical/radical].17 > hinv
Iris Audio Processor: version A2 revision 1.1.0
1 200 MHZ IP22 Processor
FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
CPU: MIPS R4400 Processor Chip Revision: 6.0
On-board serial ports: 2
On-board bi-directional parallel port
Data cache size: 16 Kbytes
Instruction cache size: 16 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Main memory size: 192 Mbytes
EISA bus: adapter 0
Integral Ethernet: ec0, version 1
Integral SCSI controller 1: Version WD33C93B, revision D
  Disk drive: unit 1 on SCSI controller 1
Integral SCSI controller 0: Version WD33C93B, revision D
  Disk drive: unit 1 on SCSI controller 0
Graphics board: GR3-Elan


The 5.3 machine used for display is:

[lucille Radical/radical].10 > uname -a
IRIX lucille 5.3 11091810 IP17 mips

[lucille Radical/radical].11 > hinv
1 100 MHZ IP17 Processor
FPU: MIPS R4010 Floating Point Chip Revision: 0.0
CPU: MIPS R4000 Processor Chip Revision: 2.2
On-board serial ports: 4
Data cache size: 8 Kbytes
Instruction cache size: 8 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Main memory size: 128 Mbytes
I/O board, slot F: IO3B
VGX Graphics option installed
Integral Ethernet: et0, IO3
Integral SCSI controller 1: Version WD33C93A, revision 9
Disk drive: unit 5 on SCSI controller 1
Disk drive: unit 4 on SCSI controller 1
Disk drive: unit 3 on SCSI controller 1
Disk drive: unit 2 on SCSI controller 1
Integral SCSI controller 0: Version WD33C93A, revision 9
Disk drive: unit 1 on SCSI controller 0
VME bus: adapter 0

[lucille Radical/radical].12 > ginv
IRIS 4D Graphics Inventory (ginv v1.0)
--------------------------------------
Machine: 4DVGX running IRIX version 5.3
1 Screen(s) Accessible on this machine.

Screen Resolution:  1280 x 1024 pixels.
Zbuffer Resolution: 0xFF800000 min  0x7FFFFF max.
Software Accumulation Buffer with 16 bitplanes per colour component.
Alpha bitplanes in DoubleBuffered: 8, SingleBuffered: 8
Red   bitplanes in DoubleBuffered: 8, SingleBuffered: 8
Green bitplanes in DoubleBuffered: 8, SingleBuffered: 8
Blue  bitplanes in DoubleBuffered: 8, SingleBuffered: 8
Zbuffer  bitplanes present: 24
Stencil  bitplanes present: 8
Overlay  bitplanes present: 8
PopUp    bitplanes present: 2
Underlay bitplanes present: 8
User-defined Clipping Planes present: 6
antialiased points available in colormap
antialiased points available in RGB
antialiased lines available in colormap
antialiased lines available in RGB
antialiased polygons available in RGB
Number of verticies per polygon allowed: 256.

FUNCTIONS AVAILABLE:
afunction, logicop, fogvertex, two-sided lighting, blendfunction, readsource AUTO/FONT/BACK, readsource ZBUFFER, scrbox, subpixel points, subpixel lines, subpixel polygons, stereo, texture-mapping, polymode. 

FUNCTIONS NOT AVAILABLE:
64x64 patterns. 



-Jason

-- 
-------------------------------------------------------------------------------
J. Harrison at cs.ubc.ca                      http://www.cs.ubc.ca/spider/harrison
Graduate Motto: Free-time with guilt.      ftp://ftp.cs.ubc.ca/pub/local/quotes


 
Home | Overview | FAQ | Documentation | Support | Download | Mailing List
Windows? | Development | Bug Reporting | Contributing | Contact Us | Sponsors
 
site hosted by
SourceForge Logo